Galvanised Steel Gang Nail Connector Plates for Roof Trusses
gang nail plates
1
Quantity
A galvanised steel gang nail connector, or gang plate truss, is a kind of tie. roof truss gang nail plates are light gauge metal plates used to connect prefabricated light frame wood trusses. They are produced by punching light gauge galvanized steel to create teeth on one side. The teeth are embedded in and hold the wooden frame components to the plate and each other.
roof truss gang nail plates are used to connect timber of the same thickness in the same plane. When used on trusses, they are pressed into the side of the timber using tools such as a hydraulic press or a roller. As the plate is pressed in, the teeth are all driven into the wood fibers simultaneously, and the compression between adjacent teeth reduces the tendency of the wood to split.
The roof truss gang nail plates are manufactured from ASTM A653/A653M, A591, A792/A792M, or A167 structural quality steel and is protected with zinc or zinc-aluminum alloy coatings or their stainless steel equivalent. gang nail plates for trusses are manufactured with varying length, width and thickness (or gauge) and are designed to laterally transmit loads in wood. They are also known as stud ties, metal connector plates, mending plates, or nail plates.
roof truss gang nail plates are used to connect timber of the same thickness in the same plane. When used on trusses, they are pressed into the side of the timber using tools such as a hydraulic press or a roller. As the plate is pressed in, the teeth are all driven into the wood fibers simultaneously, and the compression between adjacent teeth reduces the tendency of the wood to split.
The roof truss gang nail plates are manufactured from ASTM A653/A653M, A591, A792/A792M, or A167 structural quality steel and is protected with zinc or zinc-aluminum alloy coatings or their stainless steel equivalent. gang nail plates for trusses are manufactured with varying length, width and thickness (or gauge) and are designed to laterally transmit loads in wood. They are also known as stud ties, metal connector plates, mending plates, or nail plates.
| Products name | roof truss gang nail plates | ||
| Material | 1.0mm G300 Z275 Galvanised Steel | ||
| Teeth length | 8mm (could be customized | ||
| gang nail plate sizes | Code | Width | Length |
| SA50100 | 50mm | 100mm | |
| SA100100 | 100mm | 100mm | |
| SA150100 | 150mm | 100mm | |
| SA200150 | 200mm | 150mm | |
| Coil 100mm | 100mm | 15m | |
| Coil 150mm | 150mm | 15m | |
| The gang nail plate sizes could be customized | |||